Name: MOXA CSM-400-1214 slide-in Ethernet-to-Fiber Media Converter
Brand: MOXA
Availability: OutOfStock

MOXA CSM-400-1214 slide-in Ethernet-to-Fiber Media Converter

1 x 10/100BaseT(X) Ports (RJ45 connector)
1 x 100BaseFX Ports (multi-mode SC connector)
5 KM Typical data transmission distance on fiber
Supports IEEE 802.3AH OAM protocol
12 VDC input power range
LFP (Link Fault Pass-Through) and FEF (Far End Fault)
-20 to 55°C operating temperature range

Brand: MOXA
Model: CSM-400-1214

0 reviews • Write a review

Datasheet

Operating Temperature (-20 to 55°C)
Relative Humidity (5 to 95% non-condensing)
Vibration (IEC 60068-2-6)

$0.00

Ex Tax: $0.00

Buy Now ENQUIRE NOW

Add to Wish List Compare this Product

Tags: Industrial Network Infrastructure , Industrial Data Communications , Ethernet Media Converters , Converters , Ethernet-to-Fiber Converters , Industrial Media Converters , Industrial Converters , MOXA CSM-400 Series

The CSM-400 Series consists of slide-in Ethernet-to-fiber managed media converters for the NRack System™. The modules convert media from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors) and can be installed in any NRack System™ chassis. The CSM-400 modules support LFP and FEF for easily tracing network link failures and support store-and-forward and pass-through modes, 802.3AM OAM for remote management and monitoring, as well as WDM-type fiber modules to reduce fiber cable cost.

You can also find the CSM-400-1224, CSM-400-1218, and CSM-400-1213-T models in the Industrial Media Converters.

Enjoy the ease of online inquiries for the MOXA CSM-400-1214 slide-in Ethernet-to-Fiber Media Converters. You can submit your inquiry on our website and get the most friendly communication with our experts to choose high-quality industrial automation products at a reasonable price from our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).

eth to fiber : Interface
10/100Mb RJ45 (Megabit) Ports	Yes : 1 Port
10/100/1000Mb RJ45 (Gigabit) Ports	No
10/100Mb (Megabit) POE Ports	No
100Mb Fiber optic multi mode (Megabit) Ports	Yes : 1 Port (SC connector)
1000Mb Fiber optic multi mode (Gigabit) Ports	No
100Mb Fiber optic single mode (Megabit) Ports	No
1000Mb Fiber optic single mode (Gigabit) Ports	No
1000Mb SFP Fiber optic (Gigabit) Ports	No
M12 port	No
Alert Output	No
Magnetic Isolation Protection	1.5 kV (built-in)
eth to fiber : Standards and protocols
Protocols and work standards	IEEE 802.3u for 100BaseT(X) and 100BaseFX
eth to fiber : General
Maximum cable length for data transfer	5 KM
MTBF	1,454,560 hrs
eth to fiber : Power Requirements
Input Voltage	12 VDC
Input Current	220 mA @ 12 VDC
Overload Current Protection	Supported
Type of power input	-
Power Consumption	220 mA @ 12 VDC
eth to fiber : Physical Characteristics
Standards and Certifications	EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 2 kV(AC), 1 kV(DC); Signal: 1 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF, IEC 61000-4-11; Environmental Testing: IEC 60068-2-1, IEC 60068-2-14, IEC 60068-2-2, IEC 60068-2-3; Safety: EN 62368-1, UL 62368-1; Vibration: IEC 60068-2-6; Telcordia (Bellcore), GB
Housing	-
Dimensions	86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in)
Weight	0.115kg
Operating Temperature	-20 to 55°C (-4 to 131°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operation Humidity	5 to 95% (non-condensing)
Installation	Can be installed in any NRack System™ chassis

Datasheet

MOXA CSM-400-1214 slide-in Ethernet-to-Fiber Media Converter

Contact Form

Write a review