Your Cart

Westermo CyBox LTE 2-W LTE and WLAN Router

Westermo CyBox LTE 2-W LTE and WLAN Router
Westermo CyBox LTE 2-W LTE and WLAN Router
Westermo CyBox LTE 2-W LTE and WLAN Router
Westermo CyBox LTE 2-W LTE and WLAN Router
Westermo CyBox LTE 2-W LTE and WLAN Router

  • Optional Wi-Fi 5 radio with 3 x 3 MIMO with up to 1300 Mbps
  • Up to 2 x LTE interfaces for channel-bundled WAN access
  • 4 x SIM card slots for each LTE interface
  • 2 x 10/100/1000BaseT(X) Ports (M12 X-coded connector)
  • 1 x USB/Serial Port (USB 2.0, RS232, M12 A-coded connector)
  • Power over Ethernet (PoE+) according to IEEE 802.3at
  • IP40-rated aluminum body and wall mounting
  • Ultra-wide-range power supply 24 to 110 VDC
  •  -40 °C to +70 °C operating temperature range

  • Operating Temperature (-40 to 70°C)
  • Relative Humidity (0 to 95% RH, non-condensing)
  • IP protection (IP40)
  • Railway Transportation
$0.00
Ex Tax: $0.00

The CyBox LTE 2-W is a member of the CyBox family – robust wireless communication routers for railway applications. It offers stable, secure, and broadband LTE connections for train-to-ground communication and high-speed internet. The device hosts up to two LTE interfaces for parallel LTE channel use and thus maximizes throughput, or one Wi-Fi 5 interface combined with an LTE interface to boost network efficiency and connect to client devices such as mobile phones. Country-specific LTE/Wi-Fi standards are adopted for worldwide use in every type of train.

On the fixed network side, the router features two Gigabit Ethernet ports, which are, as an option, internally connected to an unmanaged switch and can be used either for redundancy to increase the availability of services or to connect a second CyBox LTE 2-W. The bypass relay option ensures a high-speed connection even if the router is powered down.

The CyBox LTE 2-W provides flexible powering options by either an internal power supply or Power-over-Ethernet (PoE+). The PoE daisy chaining offers wireless connectivity with two routers using just one cable – a noticeable cost-saving factor, especially in retrofit programs.

The CyBox LTE 2-W firmware provides a convenient management interface via a web service. Besides global setup parameters, the open-source software OpenWrt allows the configuration of the radio interfaces, including provider information and the login dialog, as well as the setup of the stateful firewall. The access point, router configurations, and management firmware can be updated remotely. Furthermore, the built-in, fully configurable stateful firewall and multi-VPN support with hardware-accelerated encryption ensure communication security.


You can also find the CyBox GW 2-PCyBox GW-PCyBox RT 2-A, and CyBox RT 3-W models in the Wireless Routers.


You can explore our wide range of products and enquire about the Westermo CyBox LTE 2-W LTE and WLAN Router for your industrial automation needs. Our sales experts will pave the way to buy at the lowest price in Dubai, UAE, Saudi Arabia, Oman, and the Middle East.

3g modem : Interface
SIM card slotYes : Up to 4 SIM cards per LTE interface
Ethernet PortsYes : 2 x 10/100/1000BaseT(X), M12 X-coded connectors
USBYes : 1 x USB 2.0 Port (M12 8-pin female A-coded connector)
Digital Input and OutputNo
Serial portYes : 1 x RS232 Port (M12 8-pin female A-coded connector)
Alert OutputNo
Band Options4G (LTE) Bands: B1, B3, B7, B8, B20, B28, B32, B38, B40, B41, B42, B43; 3G Bands: B1, B5, B8
Cellular Standards4G (LTE Cat-7), 3G
Cellular Antenna Connectors5 or 6 x QLS or 3 x SMA antenna connectors with optional QLS to SMA adapter
WLAN StandardsIEEE 802.11 a/b/g/n/ac (Wi-Fi 5)
WLAN Antenna Connector3 x RF antennas (3 x 3 MIMO technology)
GPS Antenna ConnectorYes
3g modem : Radio specifications
Radio Connection typeSupports up to 2 LTE interfaces for channel-bundled WAN access
Maximum data transfer speed of 2G-
Maximum data transfer speed of 3G-
Maximum data transfer speed of 4Gup to 300 Mbps download / 150 Mbps upload
WiFi Radio Frequency2.412 GHz to 2.472 GHz, or 4.920 GHz to 5.825 GHz, selectable band
3g modem : Software Specifications
Routing RedundancyOptional internal high-speed Ethernet switch for redundancy or daisy chaining
VPNmulti-VPN with hardware-accelerated encryption
FirewallStateful firewall with multi-level client/AP isolation
Time ManagementNo
ManagementNo
3g modem : General
LED IndicatorsPower LED Status, Fail LED Status, Module 1 LED Status, Module 2 LED Status, LAN LED Status
MTBFapprox. ~280.000 h (acc. to IEC 62380)
Operating modeAccess Point, Router
3g modem : Standards and protocols
ProtocolsNMEA, RTCM 104 (GNSS)
3g modem : Features and capabilities
Send and receive SMSNo
3g modem : Security
Security and EncryptionEncryption: AES, TKIP, WPA, WPA2, WPA3
AuthenticationNo
3g modem : Power Requirements
Power ConnectorM12 4-pin male A-coded
Power Consumption (Output Adapter)15 W typ., 25 W max.
Input Voltage24 to 110 VDC, wide-range power supply (compliant to EN 50155)
POE SupportYes : PoE+, Class-4 powered device, IEEE 802.3at
Input Current-
Reverse Polarity Protection-
3g modem : Buttons
Power buttonNo
ResetYes
3g modem : Physical Characteristics
InstallationWall Mounting
Dimensions105 (130) mm x 55 mm x 206 mm (w h d) (incl. mounting points)
HousingIP40, aluminum, conductive cooling
Weightup to 1350 g
Operating Temperaturedepending on temperature class of Wi-Fi module, Class OT4, -40.. +70 °C (85 °C) operating or, Class OT3, -25.. +70 °C (85 °C) operating
Storage Humiditymax. 95 % non-condensing operating and storage
Storage Temperature-40 °C to +85 °C
Type of UseRailway applications
Standards and CertificationsDirective (EU) 2016/797: EN 50155 (IEC 60571), EN 45545-2 (HL 1 to HL 3), EN 61373 (Category 1, Class B); RED – 2014/53/EU: EMC, radio spectrum, health & safety; IP40; IEC 62380

Write a review

Note: HTML is not translated!
Rating
Bad Good
Captcha