Your Cart

Westermo BRD-355A-AU Industrial ADSL/VDSL Router

Westermo BRD-355A-AU Industrial ADSL/VDSL Router
Westermo BRD-355A-AU Industrial ADSL/VDSL Router
Westermo BRD-355A-AU Industrial ADSL/VDSL Router
Westermo BRD-355A-AU Industrial ADSL/VDSL Router
Westermo BRD-355A-AU Industrial ADSL/VDSL Router

  • Supports Australia Frequency Bands
  • Fixed line broadband connection via ADSL or VDSL2
  • 2 x 10/100 Mbit/s Ethernet ports (RJ-45 connector)
  • 1 x RS-232 Serial port (9-pin D-sub connector)
  • 1 x xDSL Port for DSL line connection (RJ-11 connector)
  • IP40-rated Metal body design
  • 35 mm DIN-rail mounting
  • 12 to 48 VDC input power (Wide Range 10 to 60 VDC)
  • Wide operating temperature range (-40 to +70°C)

  • Operating Temperature (-40 to 70°C)
  • Relative Humidity (0 to 90% relative humidity non-condensing)
  • IP protection (IP40)
  • Factory Automation
  • Oil & Gas
$0.00
Ex Tax: $0.00

Remote access removes boundaries, eliminates the need for time consuming site visits and provides a network infrastructure suitable for today’s ”always on”-society. The BRD-355 industrial ADSL/VDSL router uses the Internet to connect remote networks. Allowing IP enabled SCADA, HMI, PLCs, sensors or legacy serial devices etc. to communicate with each other, a prerequisite for any Industrial Internet (IIoT/IoT) solution.

The BRD-355 has a built-in two-port Ethernet switch and an RS-232-port, for both new and legacy modem replacement. Designed to be installed on a DIN rail all connectors and LEDs have been positioned on the front of the unit, for easy access and fast status feedback.

The cybersecurity features of the BRD-355 prevent unauthorized access and secure communication for Internet-enabled applications. The easy-to-use firewall filters incoming and outgoing traffic, allowing only approved packets to pass through. The BRD supports a variety of VPN technologies to ensure that data can be sent over public or private networks securely via SSL (OpenVPN) or IPsec. The BRD-355 has fully integrated with the easy-to-use, Westermo WeConnect high-security remote access solution.

Upgrading legacy serial or modem systems to IP-enabled, can prove both costly and time consuming. Therefore the BRD-355 includes a wide set of feature to allow the easy migration of the legacy serial/modem applications. The features include interpreting the ATD modem emulation, lease line over IP and multidrop application where a master is connected to multiple slave locations.

 

You can also find the BRD-355A and BRD-355B models in the Broadband DSL Routers.

 

Inquire about the Westermo BRD-355A-AU Industrial ADSL/VDSL Router, designed for industrial automation solutions. Feel free to get in touch with our sales team to give you the best solutions at the best global price in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).

3g modem : Interface
SIM card slotNo
Ethernet PortsYes : 2 x 10/100 Mbit/s TX Ports (RJ-45 connector)
USBNo
Digital Input and OutputNo
Serial portYes: 1 x RS-232 Serial port (9-pin D-sub connector), 300 bit/s - 115.2 kbit/s
Alert OutputNo
Band OptionsNo
Cellular StandardsNo
Cellular Antenna ConnectorsNo
WLAN StandardsNo
WLAN Antenna ConnectorNo
GPS Antenna ConnectorNo
3g modem : Radio specifications
Radio Connection type-
Maximum data transfer speed of 2G-
Maximum data transfer speed of 3G-
Maximum data transfer speed of 4G-
WiFi Radio Frequency-
3g modem : Software Specifications
Routing RedundancyVRRP
VPNIPsec, OpenVPN (SSL VPN), L2TP, PPTP, GRE
FirewallStateful Inspection, NAT, Port Forwarding
Time ManagementNo
ManagementWeConfig, web interface (HTTP and HTTPS), Command Line Interface (CLI) via SSHv2 and Telnet, SNMPv1/v2c/v3, RFC5424/RFC3164 Syslog (log files and remote syslog server)
3g modem : General
LED IndicatorsYes : STS, xDSL
MTBFMIL-HBDK-217F: 995,000 hours
Operating modeADSL/VDSL Router/Bridge, Serial-to-Ethernet Converter
3g modem : Standards and protocols
ProtocolsxDSL protocols: TI.413, ADSL (A), G.Lite, ADSL2 (A/L/M), ADSL2+ (A/M), VDSL2 (8a, 8b, 8c, 8d/12a, 12b/17a), VDSL2 Vectoring
3g modem : Features and capabilities
Send and receive SMSYes
3g modem : Security
Security and EncryptionNo
AuthenticationPre-shared Key (PSK), TLS
3g modem : Power Requirements
Power Connector-
Power Consumption (Output Adapter)-
Input Voltage12 to 48 VDC (Wide Range 10 to 60 VDC) with Galvanic isolation to all ports
POE SupportNo
Input Current1000 mA at 12 VDC
Reverse Polarity ProtectionSupported
3g modem : Buttons
Power buttonNo
ResetYes
3g modem : Physical Characteristics
InstallationDIN-rail mounting
Dimensions53 x 103 x 92.3 mm (2.09 x 4.06 x 3.63 in)
HousingFull metal
Weight0.4 kg
Operating Temperature-40 to +70°C (-40 to +158°F)
Storage Humidity0-90% relative humidity
Storage Temperature-50 to +85°C (-58 to +185°F)
Type of UseIndustrial environment
Standards and CertificationsIngress protection: IP40; MIL-HBDK-217F; EMC: EN 55032, Electromagnetic compatibility of multimedia equipment - Emission Requirements, EN 55035, Electromagnetic compatibility of multimedia equipment - Immunity Requirements, including its amendments A11:2019; Safety: EN 62368-1, Audio/video, information and communication technology equipment - Part 1: Safety requirements including its amendments Nos. A11:2020

Write a review

Note: HTML is not translated!
Rating
Bad Good
Captcha