Your Cart

MOXA EDF-G1002-BP-CT-T Industrial LAN Firewall

MOXA EDF-G1002-BP-CT-T Industrial LAN Firewall
MOXA EDF-G1002-BP-CT-T Industrial LAN Firewall
MOXA EDF-G1002-BP-CT-T Industrial LAN Firewall
MOXA EDF-G1002-BP-CT-T Industrial LAN Firewall
MOXA EDF-G1002-BP-CT-T Industrial LAN Firewall
MOXA EDF-G1002-BP-CT-T Industrial LAN Firewall
MOXA EDF-G1002-BP-CT-T Industrial LAN Firewall

  • 2 x  10/100/1000BaseT(X) Ports (RJ45 Connector)
  • 1 x  10/100/1000BaseT(X) MGMT Port (RJ45 Connector)
  • 12/24/48 VDC Redundant dual power inputs
  • Metal body design
  • Supports MXsecurity and MXstudio for easy network management
  • DIN-rail and Wall mounting installation
  • -40 to 75°C operating temperature

  • Brand: MOXA
  • Model: EDF-G1002-BP-CT-T
  • Operating Temperature (-40 to 75°C)
  • Relative Humidity (5 to 95% non-condensing)
  • Freefall (IEC 60068-2-32)
  • Shock (IEC 60068-2-27)
  • Vibration (IEC 60068-2-6)
  • Factory Automation
  • Railway Transportation
  • Road Transportation
  • Power Utility
$0.00
Ex Tax: $0.00

The EDF-G1002-BP Series is an industrial-grade LAN firewall with IPS and DPI functionality to protect mission-critical assets and network zones. These industrial firewalls support software-configurable Gen3 LAN bypass to achieve bump-in-the-wire installation and minimize the installation impact for industrial applications such as ITS, pump-and-treat systems in water stations, distributed control systems in oil and gas, and PLC/SCADA systems in factory automation.

Dynamically Prevent Malicious Cyber Threat Activity With IPS/IDS

The EDF-G1002-BP Series is designed to protect mission-critical assets at the OT network edge with advanced intrusion prevention and detection systems (IPS/IDS). It analyzes network traffic in the background and enables behavior monitoring and awareness of cyber activities. These firewall devices support both a “Monitor” and “Protect” mode to facilitate different OT scenarios. “Monitor” mode gives administrators full visibility of cyber threat activities on the network. If a threat is detected, administrators can easily switch to “Protect” mode to block and contain any malicious operations.

Industrial Deep Packet Inspection for Mission-critical Assets

The EDF-G1002-BP Series supports advanced Deep Packet Inspection (DPI) technology, providing awareness of industrial protocol data and allowing for granular command of control system traffic to critical controllers.

 

You can also find the EDF-G1002-BP-TEDF-G1002-BP, and EDF-G1002-BP-CT models in the Network Security Appliance.

 

Experience the convenient way to purchase the MOXA EDF-G1002-BP-CT-T Industrial LAN Firewall in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman). Our sales experts will provide the most helpful information about the price and sale conditions for a wonderful buying experience.

IPS : INTERFACE
Ethernet2 x 10/100/1000BaseT(X) Ports (RJ45 Connector), 1 x 10/100/1000BaseT(X) MGMT Port (RJ45 Connector)
Serial1 x RS-232 Console Port (USB Type-C connector)
ButtonsReset button
Digital Input Channels+13 to +30 V for state 1, -30 to +3 V for state 0, Max. input current: 8 mA
LED IndicatorsPWR1, PWR2, STATE, BYPASS, USB
Alarm Contact ChannelsResistive load: 1 A @ 24 VDC
IPS : DOS AND DDOS PROTECTION
TechnologyARP-Flood, FIN Scan, ICMP Flood, TCP Sessions Without SYN, NMAP-ID Scan, NMAP-Xmas Scan, Null Scan, SYN/FIN Scan, SYN/RST Scan, SYN-Flood, Xmas Scan
IPS : SOFTWARE FEATURES
Supported Interfaces-
Management-
Authentication-
IPS : FIREWALL
ThroughputMax. 45K packets per second/500 Mbps (based on RFC 2544)
FilterDDoS, Ethernet protocols, ICMP, IP address, MAC address, Ports
IPS Throughput-
Intrusion Prevention SystemEnabled by default. IPS pattern update functionality requires an additional license
Latency-
Deep Packet InspectionModbus TCP, Modbus UDP, DNP3, IEC 60870-5-104, IEC 61850 MMS, EtherNet/IP, Omron FINS, Siemens S7 Comm., Additional protocols will be supported through future firmware updates.
Policy Enforcement Rules-
ICS Protocol Filter Profiles-
IPS : REAL-TIME FIREWALL / VPN EVENT LOG
Event TypeFirewall events, Protocol DPI, and IDS/IPS events
MediaSyslog server, Local storage, SNMP Trap
IPS : POWER PARAMETERS
ConnectionRemovable terminal block
Input Voltage12/24/48 VDC (Redundant dual inputs)
Input Current0.69 A (max)
Reverse Polarity ProtectionSupported
IPS : PHYSICAL CHARACTERISTICS
HousingMetal
Dimensions35 x 125 x 100 mm (1,38 x 4.92 x 3.94 in)
Weight385 g (0.85 lb)
InstallationDIN-rail mounting, Wall mounting
Operating Temperature-40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
Standards and CertificationsSafety: IEC 62368-1, UL 62368-1; EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF; Railway: EN 50121-4; Traffic Control: NEMA TS2; Shock: IEC 60068-2-27; Freefall: IEC 60068-2-32; Vibration: IEC 60068-2-6; Telcordia (Bellcore), GB
MTBF2,929,641 hrs

Write a review

Note: HTML is not translated!
Rating
Bad Good
Captcha