Partners0
Products0
Industries7254
Partners0
Products0
Industries7254
Operating Temperature (0 to 40°C)
Relative Humidity (5 to 90% relative humidity)
MarineORiNOCO® AP-9100 takes advantage of Proxim’s expertise in
both Wi-Fi and outdoor systems to deliver a dual-radio 802.11ac Access Point
ready for outdoor use.
ORiNOCO® AP-9100R features MIMO 2x2:2 performance with an aggregate data rate of 1166 Mbps and unparalleled flexibility. In addition, it
benefits from the robust and IP67 weatherproofed design of Proxim Tsunami®
products with unique features such as dual gigabit Ethernet ports with
controllable PoE in and out.
Organizations of all sizes encompassing Carriers, Small and Medium Enterprises, Health Care, Governments, and Public safety departments, can achieve higher performance than their existing wired and wireless LANs thanks to 802.11ac Advantage: significantly higher throughput and longer range.
You can place an order for the Proxim ORiNOCO AP-9100 Wireless LAN Access Point, which is applicable
in the Marine industry, online via one of our Middle East
branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a
specific time.
| Access Point : Interfaces | |
| Wired Ethernet | One auto MDI-X RJ45 10/100/1000Mbps Ethernet |
| Wireless Protocol | Radio #1: 802.11a/n/ac , Radio #2: 802.11b/g/n |
| Access Point : Radio Specifications | |
| Frequency | Radio #1 : 5.150 – 5.350, 5.470 - 5.850 GHz (Subject to Country Regulations), Radio #2 : 2.400 – 2.484 (Subject to Country Regulations) |
| Throughput | Radio #1 : Upto 670 Mbps, Radio #2 : Upto 310Mbps |
| Access Point : Antenna | |
| Antenna Type | Radio #1 : Three integrated PIFA antennas: 5 dBi, Radio #2 : Three integrated PIFA antennas: 4.5 dBi |
| Access Point : Management | |
| Remote | Telnet and SSH, Web GUI and SSL, TFTP, SNMP v1, v2c and v3 |
| Other | Syslog, and SNTP |
| Access Point : Security | |
| Encryption | 802.11i Wireless Security with AES-128, TKIP or WEP |
| 802.1X SUPPORT | PEAP, LEAP, EAP-FAST, EAP-SIM, EAP-TTLS, EAP-AKA |
| Authentication | Enterprise/802.1x, Personal/ PSK (Pre Shared Key) or Open plus Internal MAC Address Control List |
| Access Point : Network | |
| VLAN | 802.1Q: Management VLAN. Transparent, Access and Trunk mode. |
| DHCP | Client and Server |
| Access Point : Power Requirement | |
| Power Consumption | < 12.9 Watt typical |
| Power Over Ethernet (PoE) | 802.3af/at compliant |
| Power adapter | 110/220 V AC - 50/60 Hz (input), 12 V DC - 1.25 A (output) |
| ELECTRO STATIC DISCHARGE | Conductive : 4 kV, Air : 8 kV |
| SURGE CAPACITY | Line to Line : 0.5 kV, Line to Earth 1 kV (EN 61000-4-5) |
| Access Point : Physical Characteristics | |
| Temperature | OPERATING 0º to 40ºC (32º to 104º Fahrenheit), STORAGE -20º to 60ºC (-4º to 140º Fahrenheit) |
| Humidity | 5 - 90% relative humidity |
| Dimensions Packaged | 13.2 x 8.45 x 2.16 in. (335 x 215 x 55 mm) |
| Dimensions Unpackaged | 6.69 x 6.69 x 1.74 in. (170 x 170 x 44.1 mm) |
| Weight (PACKAGED) | 1.75 lbs (790 g) |
| Weight (UNPACKAGED) | 0.75 lbs (340 g) |
| Safety | UL 60950, CAN/CSA-C22.2 No. 60950, IEC 60950, EN 60950 (part -1 and -22), Plenum rated (ATX 200 material) |
| Access Point : General | |
| MTBF | Over 500k hours |
| Access Point : Package Checklist | |
| Package Contents | One ORiNOCO® AP-9100 unit, One power adapter, One Wall/Ceiling mounting kit, One Quick Installation Guide |
| Access Point : Wireless | |
| AP-AP Communications | WDS with STP loop avoidance |
| RF Environment | Rogue Scan |
| Other | 802.11h Spectrum and Transmit Power Management Extensions |
