Your Cart

Nexcom VES30-4S POE switch

Nexcom VES30-4S POE switch
Nexcom VES30-4S POE switch
Nexcom VES30-4S POE switch
Nexcom VES30-4S POE switch
Nexcom VES30-4S POE switch

  • 4 x 10/100/1000 Mbps PoE port (802.3af compliance)
  • 15.4W at 48VDC for each PoE port
  • Low battery voltage protection
  • CE/FCC, E13 mark certification
  • Wide power input range 9 ~ 36VDC
  • -30 ~ 70°C operating temperature
  • Ignition power on/off support
  • Power on/off delay time setting

0 reviews • Write a review
Datasheet
  • Operating Temperature (-30 to 70°C)
  • Relative Humidity (10% to 90%, non-condensing)
  • Vibration (1g@5~500 Hz)
  • Factory Automation
$0.00
Ex Tax: $0.00
Buy Now ENQUIRE NOW
Add to Wish List Compare this Product
Beijer BFI-E3-14-0041-3F1Y Frequency inverter
Quickview
Beijer BFI-E3-14-0041-3F1Y Frequency inverter
$0.00
Ex Tax:$0.00
Add to Wish List Compare this Product
Beijer BFI-E3-24-0041-3F42 Frequency inverter
Quickview
Beijer BFI-E3-24-0041-3F42 Frequency inverter
$0.00
Ex Tax:$0.00
Add to Wish List Compare this Product
Beijer BoX2 base protocol converter-IoT gateway-edge controller
Quickview
Beijer BoX2 base protocol converter-IoT gateway-edge controller
$0.00
Ex Tax:$0.00
Add to Wish List Compare this Product
Beijer BoX2 extreme protocol converter-IoT gateway-edge controller
Quickview
Beijer BoX2 extreme protocol converter-IoT gateway-edge controller
$0.00
Ex Tax:$0.00
Add to Wish List Compare this Product
Beijer BoX2 extreme SC protocol converter-IoT gateway-edge controller
Quickview
Beijer BoX2 extreme SC protocol converter-IoT gateway-edge controller
$0.00
Ex Tax:$0.00
Add to Wish List Compare this Product
Beijer BoX2 pro SC protocol converter-IoT gateway-edge controller
Quickview
Beijer BoX2 pro SC protocol converter-IoT gateway-edge controller
$0.00
Ex Tax:$0.00
Add to Wish List Compare this Product
Beijer iX T7B-SM graphic touch marine HMI
Quickview
Beijer iX T7B-SM graphic touch marine HMI
$0.00
Ex Tax:$0.00
Add to Wish List Compare this Product
Beijer X2 extreme 12 HP SC Rugged HMI
Quickview
Beijer X2 extreme 12 HP SC Rugged HMI
$0.00
Ex Tax:$0.00
Add to Wish List Compare this Product

VES30-4S mobile PoE switch is designed for telematics applications in harsh environments with a fanless enclosure. It provides 5 Giga bit Fast Ethernet ports including 4 IEEE 802.3af compliance PoE ports to transfer large amounts of video streaming, voice, and critical data across the Ethernet network smoothly and quickly.

As the power source from a vehicle is unstable by nature, the mobile PoE switches support a wide voltage input range of 9VDC to 36VDC and provide smart power management with low battery voltage protection, power-on, and power-off delay timer, and auto ignition power on/off functions. These unique features can secure reliable operation and prevent premature failure of both the PoE switches and the vehicle.

VES30-4S is encased in a fanless dustproof enclosure and can operate under shock, vibration, and temperature extremes from -30 to 70°C. The mobile PoE switches are also small in size and support din rail mounting for ease of installation with PD devices such as IP cameras and Wi-Fi access points.


You can place an order for the Nexcom VES30-4S POE switch, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

In-Vehicle Networking : Genaral
ArchitectureSwitch architecture. Highly integrated, unmanaged-smart gigabit, store and forward switch, 4K entry MAC address table with automatic learning and aging
Standard ComplianceIEEE 802.3 for 10BaseT Ethernet, IEEE 802.3u for 100BaseT(X) Fast Ethernet, IEEE 802.3ab for 1000BaseT(X) Gigabit Ethernet, IEEE 802.3x for flow control, IEEE 802.3af Power Over Ethernet
In-Vehicle Networking : Interface
Network Connector4-port RJ45 for 10/100/1000 base-T. PoE IEEE 802.3af compliance, total 60W, 1-port RJ45 for 10/100/1000 base-T
I/O InterfacePower: 1 x 9~36VDC input with ignition, Ethernet: 4 x RJ45 10/100/1000 Mbps PoE port, 802.3af compliance, 1 x RJ45 10/100/1000 Mbps, LED: 1 x power indicator, 8 x PoE indicator, 1 x low voltage protection indicator
In-Vehicle Networking : Power Requirement
Power ManagementSelectable boot-up & shut-down voltage for low power protection by Dip switch, Power on/ off delay time setting by Dip switch
Power over EthernetPoE standard IEEE 802.3af Power over Ethernet/PSE, PoE power supply type end-span, PoE power output per port 48V DC, 350mA. max. 15.4 watts
In-Vehicle Networking : Physical Characteristics
Dimensions167 x 51.49 x 139.6 mm (65.75" x 20.27" x 54.96")
Storage temperatures-35°C to 85°C
Humidity10% to 90% (non-condensing)
Vibration1g@5~500 Hz
Operating temperaturesAmbient with air -30°C to 70°C
Standards/CertificationsCE approval, FCC Class B, E13 Mark
Weight1kg
EnvironmentOperating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure, Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity tes, Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20, Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g

Write a review

Note: HTML is not translated!
Rating
Bad Good
Captcha
Quickview
Nexcom VES30-8S POE switch Nexcom VES30-8S POE switch
Brand: NEXCOM
Nexcom VES30-8S POE switch
VES30-8S mobile PoE switch is designed for telematics applications in harsh environments with a fanless enclosure. It provides 9 Giga bit Fast Etherne..
$0.00
Ex Tax:$0.00
Add to Wish List Compare this Product