Name: Nexcom SCARA Robot Solution
Brand: NEXCOM
Availability: InStock

Nexcom SCARA Robot Solution

NexROBO solution provides an open programming environment for users to develop their own robot applications. It consists of robot body and NEXCOM’s robot controller in the control cabinet. Motor drives, I/O signals and related circuits are all integrated based on EtherCAT control network. I/O and motor control can easily be expanded through EtherCAT communication. Beside general system configuration, NexROBO solution always allows the flexibility to change components in the robot system for unlimited possibilities.

You can place an order for the Nexcom SCARA Robot Solution, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Nexcom Robot : General
Degree of freedon	4
Nominal load capacity	6kg
Motion range	Maximum reach radius: 600mm (J1: ±130°, J2: ±150°, J3: 200mm, J4: ±360°)
Position repeatability	J1+J2: ±0.02 mm, J3: ±0.01 mm, J4: ±0.01 mm
Cycle time	0.5 s
Weight	20 kg
Installation	floor, wall-mounting
Nexcom Robot : Controller
Processor	Intel® Core™ i5-520M processor pre-installed
RAM	2 x 2GB DDR3 SDRAM, pre-installed
LAN Port	1 x EtherCAT port, 1 x Intel® GbE LAN port
Serial Port	3 x RS232 and 1 x RS232/422/485 with Auto Flow Control
USB	6 x USB 2.0 ports
Other Ports	Dual VGA or VGA/DVI independent display, 1 x PCI expansion (10W max./per slot, 169mm max. length)
Nexcom Robot : Programming
Language	visual C/C++
Command set	positon command, velocity command, torque command
Parameters: position	position, velocity, torque

Datasheet

Nexcom SCARA Robot Solution

Contact Form

Write a review