Your Cart

Westermo IDW-90 Industrial ISDN Modem

Westermo IDW-90 Industrial ISDN Modem
Westermo IDW-90 Industrial ISDN Modem
Westermo IDW-90 Industrial ISDN Modem
Westermo IDW-90 Industrial ISDN Modem
Westermo IDW-90 Industrial ISDN Modem

  • Interoperability with ISDN, PSTN, and GSM modems
  • 1 x RS-422/485 Port (300 bit/s – 115.2 kbit/s)
  • 1 x RS-232 Port (300 bit/s – 115.2 kbit/s)
  • 1 x ISDN Port (300 bit/s - 128.0 kbit/s)
  • IP21-rated PC / ABS Material body design
  • 12 to 48 VDC, 12 to 34 VAC input power
  • DIN-rail mounting installation design
  • +5 to +55ºC operating temperature range

  • Operating Temperature (5 to 55°C)
  • Relative Humidity (5% to 95% RH)
  • IP protection (IP21)
  • Shock (IEC 60068-2-27)
  • Vibration (IEC 60068-2-6)
  • Oil & Gas
  • Railway Transportation
$0.00
Ex Tax: $0.00

The IDW-90 is an industrial IDSN modem designed to allow cost-effective and simple remote access to legacy serial industrial equipment. The AT command-driven modem is capable of synchronizing with a wide range of traditional modem negotiation standards, providing data rates of up to 128 kbit/s.

With the built-in V.34 analog modem, the IDW-90 can not only connect to ISDN-based modems but also to the PSTN units. The unit even has support for V110. which enables GSM modems to be connected as well. The complete galvanic separation of all interfaces ensures earth loops and transients do not interfere with communication. Firewalls are not an issue as data does not use the internet, and with call-back security, it is impossible for either accidental or deliberate access to any equipment attached to the modem. To keep visits to the site to a minimum, a watchdog monitors the modem, ensuring constant readiness, and remote re-configuration means that changes to settings can be handled without a site visit.

The modem is also simple to configure using the Westermo IDW-tool software; standard commands can easily be entered, and saved configurations downloaded. RS-232 connections can be made using the standard D-sub whereas the 422/485 connections use a standard screw terminal. The modem is designed to be connected to devices with no ability to control dialing, so special functions like data dialing and DTR dialing are provided to enable these devices to automatically establish the connection.


You can also find the other types of modems in the Modems.


Easy World Automation offers the easiest way to buy the Westermo IDW-90 Industrial ISDN Modem in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman) at the lowest price through online inquiring. Our sales experts will contact you to fulfill all your industrial automation needs.

3g modem : Interface
SIM card slotNo
Ethernet PortsNo
USBNo
Digital Input and OutputYes : 1 x Digital input and output
Serial portYes : 1 x RS-422/485 Port (300 bit/s – 115.2 kbit/s, Detachable screw terminal), 1 x RS-232 Port (300 bit/s – 115.2 kbit/s, 9-pin D-sub female)
Alert OutputNo
Band OptionsNo
Cellular StandardsGSM
Cellular Antenna ConnectorsNo
WLAN StandardsNo
WLAN Antenna ConnectorNo
GPS Antenna ConnectorNo
3g modem : Radio specifications
Radio Connection type-
Maximum data transfer speed of 2G-
Maximum data transfer speed of 3G-
Maximum data transfer speed of 4G-
WiFi Radio Frequency-
3g modem : Software Specifications
Routing Redundancy-
VPN-
Firewall-
Time Management-
Management-
3g modem : General
LED IndicatorsISDN Line status, ISDN Data connection, ANL, DCD, TD, RD, RTS, DTR
MTBFMIL-HDBK-217K
Operating modeISDN Modem
3g modem : Standards and protocols
ProtocolsISDN: Euro ISDN /DSS1, Leased line B1 / B2, V.110 asynchronous, HDLC async to sync, HDLC transparent, Byte transparent X.75- SLP, V.120, X.31 B channel, X.31 D channel, ML-PPP; Serial: Transparent
3g modem : Features and capabilities
Send and receive SMSYes
3g modem : Security
Security and EncryptionNo
AuthenticationNo
3g modem : Power Requirements
Power ConnectorDetachable screw terminal
Power Consumption (Output Adapter)-
Input Voltage12 to 48 VDC, 12 to 34 VAC
POE SupportNo
Input Current110 mA @ 12 VDC, 55 mA @ 24 VDC, 30 mA @ 48 VDC
Reverse Polarity ProtectionSupported
3g modem : Buttons
Power buttonNo
ResetNo
3g modem : Physical Characteristics
InstallationDIN-rail mounting
Dimensions34 x 123 x 121 mm (1.33 x 4.84 x 4.76)
HousingPC / ABS
Weight0.21 kg
Operating Temperature+5 to +55ºC (+41 to +131ºF)
Storage Humidity5 to 95% relative humidity
Storage Temperature–20 to +85ºC (–13 to +185ºF)
Type of UseIndustrial environment
Standards and CertificationsMIL-HDBK- 217F; Ingress protection: IP21; EMC: EN 61000-6-1, Immunity residential environments, EN 61000-6-2, Immunity industrial environments, EN 61000-6-3, Emission residential environments, EN 61000-6-4, Emission industrial environments, EN 50121-4, Railway signalling and telecommunications apparatus, IEC 62236-4, Railway signalling and telecommunications apparatus; Safety: EN 60950-1, IT equipment; ISDN: TBR-3

Write a review

Note: HTML is not translated!
Rating
Bad Good
Captcha