Your Cart

Westermo GDW-11 Industrial GSM Modem

Westermo GDW-11 Industrial GSM Modem
Westermo GDW-11 Industrial GSM Modem
Westermo GDW-11 Industrial GSM Modem
Westermo GDW-11 Industrial GSM Modem
Westermo GDW-11 Industrial GSM Modem
  • Dual band GSM 900/1800 MHz
  • 1 x RS-232 Port (DB9, female, 300 bit/s – 115.2 kbit/)
  • 1 x SIM slot (3 volts SIM supported)
  • IP21-rated PC / ABS body material design
  • 10 – 60 VDC power input range
  • DIN-rail mount installation design
  • -25 to +50°C operating temperature range
  • Operating Temperature (-25 to 50°C)
  • Relative Humidity (5% to 95% RH)
  • IP protection (IP21)
  • Shock (IEC 60068-2-27)
  • Vibration (IEC 60068-2-6)
  • Hazardous Location (ATEX Zone 2 Ex nA nC IIC T4 Gc)
  • Oil & Gas
  • Railway Transportation
$0.00
Ex Tax: $0.00

The GDW-11 is a modem designed to allow connection of legacy serial equipment over a GSM/GPRS network. The AT command driven modem operates over the GSM/GPRS networks providing speed up to 14.4 kbit/s on GSM or 85.6 kbit/s when using GPRS.

The GDW-11 is designed for use in heavy-duty industrial applications. The wide power range, galvanic isolation guarantee communication in the worst environments. Only industrial-grade components are used, which gives the GDW-11 an MTBF of 1,100,000 hours and ensures a long service life. A wide operating temperature range of –25 to +50°C (–13 to +122°F) is achieved with no moving parts. The GDW-11 has been tested both by Westermo and external test houses to meet many EMC, isolation, vibration, and shock standards, all to the highest levels suitable for heavy industrial environments and rail trackside applications.

The modem is simple to configure both by DIP switches as well as by the Westermo GD-tool software; standard commands can easily be entered, and saved configurations downloaded. RS-232 connections can be made using screw connections as well as the standard D-sub. The modem is designed to be connected to devices with no ability to control dialing, so special functions like data dialing and DTR dialing are provided to enable these devices to automatically establish connections.

 

End of Life Product - Replacement Available

Please note that the GDW-11 has been phased out and replaced by the Merlin-4407-T4-S2-LV.


Easy World Automation offers the easiest way to buy the Westermo GDW-11 Industrial GSM Modem in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman) at the lowest price through online inquiring. Our sales experts will contact you to fulfill all your industrial automation needs.

3g modem : Interface
SIM card slotYes : 1 x SIM slot (3 volts SIM supported)
Ethernet PortsNo
USBNo
Digital Input and OutputNo
Serial portYes : 1 x RS-232 Port (DB9, female, 300 bit/s – 115.2 kbit/)
Alert OutputNo
Band OptionsGSM900 TX 880 – 915 and RX 925 – 960 MHz, GSM1800 TX 1710 – 1785 and RX 1805 – 1880 MHz
Cellular StandardsGSM
Cellular Antenna ConnectorsSMA female, impedance: 50 ohm
WLAN StandardsNo
WLAN Antenna ConnectorNo
GPS Antenna ConnectorNo
3g modem : Radio specifications
Radio Connection type-
Maximum data transfer speed of 2GCSD: up to 14.4 kbit/s, GPRS: up to 85.6 kbit/s
Maximum data transfer speed of 3G-
Maximum data transfer speed of 4G-
WiFi Radio Frequency-
3g modem : Software Specifications
Routing Redundancy-
VPN-
Firewall-
Time Management-
ManagementWestermo GD-Tool
3g modem : General
LED IndicatorsPWR, NET, TD, RD, RTS, DTR, DCD, Status
MTBFMIL-HDBK-217K: 1,100,000 hours
Operating modeGSM Modem
3g modem : Standards and protocols
ProtocolsTransparent
3g modem : Features and capabilities
Send and receive SMSYes
3g modem : Security
Security and EncryptionNo
AuthenticationNo
3g modem : Power Requirements
Power ConnectorDetachable screw terminal
Power Consumption (Output Adapter)-
Input Voltage12 to 48 VDC
POE SupportNo
Input Current350 mA @ 12 VDC, 150 mA @ 24 VDC, 75 mA @ 48 VDC
Reverse Polarity ProtectionSupported
3g modem : Buttons
Power buttonNo
ResetNo
3g modem : Physical Characteristics
InstallationDIN-rail mounting
Dimensions34 x 123 x 121 mm (1.33 x 4.84 x 4.76)
HousingPC / ABS
Weight0.2Kg
Operating Temperature–25 to +50°C (–13 to +122°F)
Storage Humidity5 to 95% relative humidity
Storage Temperature–30 to +85°C (–22 to +185°F)
Type of UseIndustrial environment
Standards and CertificationsMIL-HDBK-217K; Ingress protection: IP21; EMC: EN 61000-6-2, Immunity industrial environments, EN 61000-6-3, Emission residential environments, EN 55024, Immunity IT equipment, FCC part 15 Class B, EN 50121-4, Railway signalling and telecommunications apparatus, IEC 62236-4, Railway signalling and telecommunications apparatus; Safety: EN 60950, IT equipment

Write a review

Note: HTML is not translated!
Rating
Bad Good
Captcha