Partners0
Products0
Industries7254
Partners0
Products0
Industries7254
Operating Temperature (0 to 50°C)
Relative Humidity (90% RH or less)
IP protection (IP20)
Factory AutomationHigh-performance servo drives for synchronized multi-axis (L7NH) or standalone (L7P) movements. All models provide auto-detect and adaptation of the connected motor, various homing modes, advanced tuning with advanced filters and high-speed motion profile calculation.
Easy World Automation offers the
easiest way to buy the Beijer BSD-L7NHB035U-4 EtherCAT servo drive in the Middle East (UAE (Dubai), KSA (Al Khobar,
Riyadh), and Oman) at the lowest price through online inquiring. Our sales
experts will contact you to fulfill all your industrial automation needs.
| Servo drives : Communication | |
| EtherCAT | Yes |
| Modbus RTU | No |
| Communication connector | RJ45 (1 input, 1 output) |
| DC-clock cycle time | 250 μs |
| Servo drives : Input ratings | |
| Control supply voltage | 380 to 480VAC |
| Mains supply voltage | 3-phase 380-480VAC |
| Overload capacity | 300 % for 3 s |
| Supply frequency | 50 to 60 Hz |
| Voltage fluctuations | -15 to +10% |
| Servo drives : Output ratings | |
| Rated power | 3.5 kW |
| Servo drives : Encoder | |
| Encoder type | Quadrature(Incremental) BiSS-B, BiSS-C(Absolute, Incremental) Tamagawa Serial(Absolute, Incremental) EnDat 2.2 Sinusoidal, Analog Hall |
| Servo drives : Regenerative | |
| Built-in brake resistor | Yes |
| Built-in brake transistor | Yes |
| Servo drives : Control specifications | |
| Control modes | Profile Position Mode Profile Velocity Mode Profile Torque Mode Cyclic Synchronous Position Mode Cyclic Synchronous Velocity Mode Cyclic Synchronous Torque Mode Homing Mode |
| Frequency response | Maximum 1Khz or above (when using 19-bit serial encoder) |
| Speed control range | Maximum 1:5000 |
| Torque control repeatibility | Within ±1% |
| Tuning modes | On line auto gain tuning Resonance filters Vibration supression |
| Servo drives : Control terminals | |
| Analog inputs | Input voltage range : -10[V] ~ +10[V] Function : Analog torque limit Total 1 input channel (not allocable) |
| Analog outputs | Total 2 input channels (allocable) |
| Digital inputs | Input Voltage range : DC 12[V] ~ DC 24[V] Total 8 input channels (allocable) The listed 15 functions can be used selectively for assignment. (*POT, *NOT, *HOME, *STOP, *PCON, *GAIN2, *P_CL, *N_CL, PROBE1, PROBE2, EMG, A_RST, SVON, LVSF1, LVSF2) Note) * Basic allocation signal |
| Digital transistor outputs | Signal rating: DC 24[V] ±10%, 120[㎃] Total 4 input channels (allocable) The listed 11 functions can be used selectively for assignment. (*BRAKE±, *ALARM±, *READY±, *ZSPD±, INPOS±, TLMT±, ,VLMT±, INSPD±, WARN±, TGON±, INPOS2±) Note) * Basic allocation signal |
| Servo drives : Physical Characteristics | |
| IP Class | IP20 |
| Size | 169x88x197 mm |
| Weight | 2.5 kg |
| Environment | Indoors in an area free from corrosive or combustible gases, liquids, or dust. |
| Humidity | 90% RH or less (no condensation) |
| Operating Temperature | 0 to 50 C° |
| Storage Temperature | -20 to +65 C° |
| Safety | 2 input channels (STO1, STO2), 1 output channel (EDM) |
